Ultralight For Sale

Pcb Solder

Are there any alternatives to soldering on a power switch for a psp onto the PCB?

(Implied in the question that you have a PSP handheld game system. Like most mass-market consumer products, it will have a power switch which was soldered onto a printed circuit board.)

There might be something out there...but your best bet is to solder it on. If you don't have a switch that has an exactly compatible footprint, you can get a switch that has attached wires (or attach wires to a switch) and solder the wires to the PCB.

PCB $12 PCB

Cables To Go Heavy Duty Solder Pump $15.99 1 Year 2 lb 27444 Solder Pump quickly and easily clears away molten solder from a PCB joint. Made heavy duty for a long service life. It has a plastic screw to isolate the technician from the work. Low-recoil won?t cause the tool to jump when operating. Aluminum Anti-static - Tip Cables To Go Desoldering Tool Heavy Duty Solder Pump www.cablestogo.com

Cables To Go 27444 7in ALUMINUM SOLDER PUMP $21.41 Quickly and easily clear away molten solder from a PCB joint. Made from heavyduty aluminum to provide a long service life. The aluminum solder pump has a plastic screw for the antistatic tip to isolate the technician from the work. Lowrecoil won t cause the tool to jump when operating. Features: Antistatic tip. Aluminum body. Low recoil.

Intel 702545501 Processor PCB $51.35 Category: SURPLUS. Warning: Computers and computer circuit boards as well as other electronic equipment contain lead which is a chemical known to the State of California to cause cancer or cause birth defects and other reproductive harm. Please wash hands after handling circuit boards and other internal components of computers and electronic equipment and avoid inhalation of fumes if heating the solder on the internal components or circuit boards.

PCB BOX $15 PCB BOX

PCB box $14 PCB box

---

How-to Video Series: How to Solder a Resistor to a PCB



Is there a different way to solder electronic devices to PCB?

soldering involves heat, heat has some deteriorating effect on electronic devices, especially when using lead free solder where the required temp profile is higher. electronics assy nowadays are getting denser thus a higher temperature is needed to compensate the high thermal mass. Is anyone out there who is studying on a alternate material that can have the same electrical and mechanical strength of solder without using heat?

I heared that laser can be used for soldering. As it just heat the pad instead of whole component, there is no much side effect on the component. But this method is not suitable for mass production.

Tags: diy, electronics, howto, pcb, pcb solder, pcb solder 2, pcb solder mask, pcb soldering, pcb soldering iron, pcb soldering temperature, soldering

Comments are closed.